Steelman 1/4-Inch Pneumatic 90-Degree Angle Die Grinder – Steelman
4.6 (145) · $ 31.99 · In stock
This rugged tool’s hardened spiral bevel gears and ball bearing construction produce a smooth-operating power tool with a 22,000 RPM peak free run speed.
The STEELMAN 1520 1/4 Inch 90-Degree Angle Pneumatic Die Grinder combines hardened spiral bevel gears with ball bearing construction to produce a smooth operating and easy to use hand held power tool. It features a powerful 0.5 HP motor that peaks with a 22,000 RPM free run speed and is controlled with a safety locking tease-trigger for precision control as well as protection from accidental startups. The one-piece body shell design simplifies maintenance by eliminating leak points and connections that can cause leaks over time. The 1/4-inch collet is set at a 90-degree angle to the body and is designed to accept a wide range of heads and bits to help you get the job done right with quick-swappable convenience. Highly efficient, the motor runs on a mere 4 cubic feet of compressed air at 90 PSI. The air inlet on the tool's base is threaded to accept a conventional 1/4-inch NPT fitting or quick disconnect coupler. Tool measures 6.5-inches long and weighs 1.5-pounds letting it get into tight spaces when needed all while not tiring out operators like heavier designs.
IDEAL GRINDING TOOL - Ideal tool for when you need to remove rust and finishing steel and non-metal surfaces
SAFETY TRIGGER LOCK - Safety trigger lock secures against accidental startup without impairing easy use
1/4-INCH COLLET - 1/4-Inch collet accepts a wide range of heads for a variety of uses
FREE SPEED - Free running speed maximum is 22,000 RPM
VARIABLE SPEED THROTTLE - Variable speed throttle for positive speed control via lever style tease trigger
REDUCED MAINTENANCE - Single piece body shell design minimizes wear points and simplifies maintenance
LOW AIR DEMAND - Operates on a mere 4 cubic feet per minute of 90 PSI compressed air
PRODUCT SPECIFICATIONS
Material:
Metal
Overall Dimensions:
6.00 in. L x 3.25 in. W x 1.34 in. H
Item Weight (lb.):
1.15
Warranty:
1 Year Limited Warranty
Country of Origin:
Taiwan
Steelman 3/4-inch (20mm) Belt Sander Automotive Repair Tool for Mechanics, Narrow Profile for Confined Spaces, 360 Degree Rotation, Built-In Regulator, Redirected Exhaust : Automotive
Steelman Pneumatic Micro Die Grinder With 5-Foot Hose And Rear Exhaust – Steelman Tools
DYNAMIC POWER Dp Dynamic Power 1 /4-in Pneumatic Drive Angle Die Grinders,green. D-313951 in the Air Grinders department at
Kobalt 1/4-in Angle Die Grinder in the Air Grinders department at
YELWAY 1/4 Angle Air Die Grinder, 20000 RPM, 90 Degree Angled Air Die Grinder, Edge
Hardened spiral bevel gears Powerful 0.5 HP motor One piece body simplifies maintenance
Steelman 1/4-inch Angle Air Die Grinder, Heavy-Duty Full Ball Bearing Construction, 0.5 HP Motor, Lock-off Throttle
DYNAMIC POWER Dp Dynamic Power 1 /4-in Pneumatic Drive Angle Die Grinders,green. D-313951 in the Air Grinders department at
SUNEX TOOLS 1/4 in. Angle Air Die Grinder SX232B - The Home Depot
Angle Grinder, 4-1/2 Inch Powerful Grinder Tool 11Amp Power Grinder with Paddle Switch and
Goodyear 1/4-in Air Die Grinder in the Air Grinders department at
Steelman 1/4-Inch Pneumatic 90-Degree Angle Die Grinder – Steelman
